In many locations from chemistry laboratories to industrial amenities, in order to guarantee the safety of life and property against a possible fire hazard, extinguishing systems are used in addition to detection and alarm methods. It can be extraordinarily important that the extinguishing methods put in may be triggered by the fire extinguishing control panel, so as to eliminate a potential fire with early intervention.
In order to meet these needs, and with 35 years of sectoral knowledge and experience, Mavili Elektronik provides:
Maxlogic Conventional Fire Extinguishing Control Panel working according to the cross-zone detection principle;
Maxlogic Extinguishing Status Indicator Unit, which permits the remote efficiency of the indicators and controls on the Control Panel;
Maxlogic Extinguishing Output Expansion Panel;
Maxlogic Extinguishant Manual Release Button, which allows the extinguishing course of to be started manually and remotely; and
to make sure that the extinguishing process could be paused, Maxlogic has produced the Extinguishant Emergency Stop Button.
All these units are produced utilizing surface-mount expertise and are geared toward making the automation of the extinguishing system and hearth and fuel detection system perfect.
เพรสเชอร์เกจไฮดรอลิค : Mavili
Mavili Elektronik develops its products by all the time contemplating the needs of the installation. In instances that require the mixing of the extinguishing system with the intelligent addressable hearth detection system, it provides options via the monitoring modules that even have a ‘supervised’ possibility.
Supervised monitoring modules play an important role in controlling the continuity of the cable connection between the loop and the extinguishing system. Failure to detect a possible open or short circuit in the wiring between the contact monitoring modules and the peripheral techniques could cause disruption of the triggering, with potentially important penalties. For this purpose, when selecting monitoring modules, it must be taken into account that they’ve supervised options.
Image copyright: Mavili
Since Maxlogic intelligent addressable fire detection and alarm management panels are continuously speaking with ‘supervise’ contact monitoring modules related to cable loops and compliant with EN 54-17 and EN 54-18 requirements, it makes it easier to monitor conditions similar to open circuits and quick circuits which will happen within the system. Many tasks can be carried out within the fire extinguishing set up, such because the management and monitoring of all valves that may interrupt the flow of water, water move alarm switches, strain switch, and electrical or diesel hearth pumps.
By including two contact monitoring modules to 2 separate relay outputs located above the Maxlogic Conventional Fire Extinguishing Control Panel, one of the modules can be used to manage errors and the opposite to regulate the fire situation, monitoring and control of the extinguishing system via an clever addressable fire detection and alarm system could be performed effectively.
For extra info, go to