Hydrogen Testing Facilities at TÜV SÜD National Engineering Laboratory

How TÜV SÜD are helping to address technical challenges
As a half of the global drive to scale back greenhouse gasoline emissions there is a urgent need to move in path of clean fuels for power. The use of hydrogen as a alternative for pure gas within the gas grid networks is seen as a serious contributor to assembly this objective. Manufacturers, fuel network companies and governments are working carefully collectively to address a selection of technical challenges before this modification can turn into a actuality. TÜV SÜD National Engineering Laboratory is a world-leading centre for move metrology research and improvement. To assist address pressure gauge ไท วัสดุ , it’s constructing a range of hydrogen tests amenities. These amenities include the Hydrogen Domestic Gas Metering Test Facility, developed for testing smaller scale gear at decrease pressures, coupled with the event of a gasoline major move standard test facility, which provides lower measurement uncertainty and greater options for elementary metrology analysis, in addition to greater hydrogen flow rate and strain ranges. This article describes the existing hydrogen take a look at services and people underneath development at TÜV SÜD National Engineering Laboratory.
The hydrogen home gas metering test facility has been developed to provide a platform to investigate not only the performance of circulate meters, but also for different gear related to hydrogen operation, together with control valves, PRVs, regulators, warmth exchangers, etc. in a hydrogen service. The test facility has been developed for small scale purposes and might ship a variety of gas flows together with hydrogen, methane, nitrogen or mixtures of hydrogen and methane. The test facility is able to delivering up to 38 Sm3/h of hydrogen to the system beneath take a look at at line pressures as much as 1500 mbar, with temperatures starting from -25 to 55 ˚C. It can operate with line sizes starting from 5 to 20 mm. Construction was accomplished last 12 months and it is now out there to be used by business for product growth or move testing of hydrogen gear and valves.
The change over from natural gas to hydrogen might take place in a staged method involving hydrogen/natural fuel blends or direct switch to pure hydrogen. Manufacturers can carry out an entire assessment of kit efficiency across a variety of hydrogen to pure gasoline compositions from zero to one hundred pc hydrogen.
The hydrogen home gas metering take a look at facility has been specifically designed for low-pressure hydrogen purposes and TÜV SÜD recognised that there was also a necessity for a bigger move, larger stress take a look at facility. TÜV SÜD has undertaken a challenge under the BEIS-funded Flow Programme to ascertain a Gas Primary Flow Standard Test Facility. Initially, it’ll function with hydrogen, nitrogen and methane but with a view to be prolonged to carbon dioxide. The facility is presently in the detailed design stage and the plan is to have an working envelope of as a lot as a hundred Sm3/hr of fuel with the power to function as much as one hundred twenty bar.
For more information on how TÜV SÜD National Engineering Laboratory might help with your valve circulate testing needs, contact Marc MacDonald on